Asus B15OM-D Manual - Página 12

Procurar online ou descarregar pdf Manual para Placa-mãe Asus B15OM-D. Asus B15OM-D 27 páginas.

M.2 socket 3

This socket allows you to install an M.2 (NGFF) SSD module.

This socket supports M Key and 2242/2260/2280 storage

devices.

Clear RTC RAM (2-pin CLRTC)

This header allows you to clear the CMOS RTC RAM data of

the system setup information such as date, time, and system

passwords.

To erase the RTC RAM:

Turn OFF the computer and unplug the power cord.

Use a metal object such as a screwdriver to short the

two pins.

Plug the power cord and turn ON the computer.

Hold down the <Del> key during the boot process and

enter BIOS setup to re-enter data.

If the steps above do not help, remove the onboard battery and short the two pins

again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the

battery.

Intel

B150 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6)

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA

6.0 Gb/s signal cables.

When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to

[AHCI].

Speaker connector (4-pin SPEAKER)

This 4-pin connector is for the chassis-mounted system warning speaker. The

speaker allows you to hear system beeps and warnings

System panel connector (10-1 pin PANEL)

This connector supports several chassis-mounted functions

USB 2.0 connectors (10-1 pin USB910, USB1112)

Connect the USB module cable to any of these connectors, then install the

module to a slot opening at the back of the system chassis. These USB

connectors comply with USB 2.0 specifications and supports up to 480Mbps

connection speed.

1-3

M.2(SOCKET3)

CLRTC

PIN 1

ASUS B150M-D