daewon DIB-B850 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Luminárias de casa de banho daewon DIB-B850. daewon DIB-B850 19 páginas.

Imprimir página

Operations

Energy saving

Select the Energy saving button once to initiate the Energy

saving mode 1. Select it again to initiate the Energy saving

mode 2. To cancel the Energy saving mode, select it once

again after the Energy saving mode 2.

No energy saving (off) → Energy saving mode 1 (green)

→ Energy saving mode 2 (red)

Energy saving mode 1 (regular saving)

Seat temperature is lowered as below and goes back to

the previous set temperature automatically as soon as the

seat is occupied.

- Low temperature (34°C/93°F) → (28°C/82°F)

- Medium temperature (37°C/99°F) → (30°C/86°F)

- High temperature (40°C/104°F) → (32°C/90°F)

Energy saving mode 2 (powerful saving)

Seat heating is turned off regardless of the current temperature setting and goes back

to the previous set temperature automatically as soon as the seat is occupied. After a

seat is unoccupied, it returns to Energy-saving mode.

The night light dims during the Energy saving mode 2 and when a user sits on the

seat, it becomes bright and dims back after leaving the seat.

Multicolored night light

Select a nozzle cleaning button repeatedly to change

the color of the night light 1 of 7 colors while the seat is

occupied.

The default color is white and can be changed in the

following order.

Pure white → Sky blue → Pretty yellow → Princess pink

→ Hot red → Sea blue → Forest green → Off

The night light dims during the Energy saving mode 2

and when a user sits on the seat, it becomes bright and

dims back after leaving the seat.

Factory default reset

To reset the bidet seat back to its factory default

settings, select the stop button 4 times within 2 seconds

to clear all current settings.

A factory reset can only be performed when the seat is

not occupied.

A tone will be heard to confirm that the bidet seat has

been initialized.

Operations

Nozzle cleaning

There are two ways to initiate nozzle cleaning.

Nozzle cleaning 1 (nozzle body care)

Select Nozzle cleaning for a second while not seated.

Nozzle extends toward and self-clean 3 times with cold

water. It retracts when finished. Pressing Stop at any time

to cancel the nozzle cleaning process.

Nozzle cleaning 2 (Nozzle tip intensive care)

Select and hold the Nozzle cleaning button for 3 seconds

while not seated. Nozzle extends toward and nozzle tip will

be self-cleaned for 40 seconds with hot water.

It stays extracted for user's manual cleaning for 5 minutes

and retracts automatically.

Select the Nozzle cleaning button again to retract the

nozzle if the cleaning process is finished earlier.

Select the Nozzle cleaning button while the nozzle tip

is being self-cleaned, and self cleaning is canceled and

extracts promptly for user's manual cleaning.

User preset

You can program your preferred settings for two users.

Follow the steps below to program and use the memory

function.

Water temperature, seat temperature, water pressure,

nozzle position, and dry temperature can be stored.

Use the bidet seat with your preferred settings first and

select and hold one of the user preset buttons for 3 seconds.

Settings will be saved with 1 beep.

Settings can be overwritten on the current presets. In this

case, old settings are deleted and new settings are saved.

Select the user preset 1. 2 LEDs(green/red) of Energy saving

light on and only green LED blinks once altering you that

user memory 1 is activated.

Select the user preset 2. 2 LEDs(green/red) of Energy saving

light on and only green LED blinks twice altering you that

user memory 2 is activated.

4 times!

Sleep mode

Select and hold Energy-saving for 3 seconds to enter Sleep

mode regardless of the seat sensor occupation. Select

Energy-saving again for a second to cancel the sleep

mode.

3 seconds