Asus EX-B250-V7 Manual - Página 12

Procurar online ou descarregar pdf Manual para Placa-mãe Asus EX-B250-V7. Asus EX-B250-V7 30 páginas.

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front

panel audio I/O module cable to this connector.

PCI Express 3.0/2.0 x16 slots

This motherboard has three PCI Express 3.0/2.0 x16 slots that support PCI

Express 3.0/2.0 x16 graphic cards complying with the PCI Express specifications.

PCI Express 3.0/2.0 x1 slots

This motherboard supports PCI Express x1 network cards, SCSI cards, and other

cards that comply with the PCI Express specifications.

Rear panel connectors

USB 2.0 ports (USBGuard support). These 4-pin Universal Serial Bus (USB) ports

are for USB 2.0/1.1 devices.

USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0/2.0

devices.

•

1-4

•

We recommend that you connect a high-definition front panel audio

module to this connector to avail of the motherboard's high-definition audio

capability.

•

If you want to connect a high-definition front panel audio module to

this connector, set the Front Panel Type item in the BIOS setup to [HD

Audio]. If you want to connect an AC'97 front panel audio module to this

connector, set the item to [AC97]. By default, this connector is set to [HD

Audio].

USB 3.0 devices can only be used for data storage.

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster

and better performance from your USB 3.0 devices.

Due to the design of the Intel

USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB

devices must update their firmware for better compatibility.

200 series chipset, all USB devices connected to the

Chapter 1: Product introduction