bolid S2000-IP-03 Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Sensores de segurança bolid S2000-IP-03. bolid S2000-IP-03 16 páginas. Analog addressable rate-of-rise and fixed temperature detector
Também para bolid S2000-IP-03: Manual de instruções (2 páginas)
Imprimir página2.2.4 Wiring
Figure 2.2.4.1 shows the typical diagram for wiring the detector into the polling loop of a PL
controller. The first terminal of the detector base can be used to connect a shield of the connecting
wire.
2.2.5 How to Open the Detector
To open the detector, detach it from its base and use the blade of a flat–head screwdriver to
release small clips through the rectangular hole shown in Figure 2.2.5.1. Then open the detector along
the cover edge.
2.2.6 Indication
Table 2.2.6.1 shows the operation modes of the detector and the relevant indication patterns.
The pattern period is 4 s; the number of steps in the pattern is 8, and the time between steps in the
pattern is 0.5 s.
Fire Alarm or Test
Pressing on the Lightpipe / Exposing to the Laserbeam
12
OPEN HERE
Detector Status
Norm
Programming
Fault
Startup
Figure 2.2.4.1
Figure 2.2.5.1
Indicator Performance
●: On
○: Off
●○○○○○○○
●●○○○○○○
●●●●○○○○
Others
Illuminates steadily
Illuminates steadily
Table 2.2.6.1