Canon 7230 Especificações técnicas - Página 18
Procurar online ou descarregar pdf Especificações técnicas para Projetor Canon 7230. Canon 7230 18 páginas. Serial functional specification
Imprimir página
SERIAL FUNCTIONAL SPECIFICATION
8.4. Input Mode Read Command
Command
"CR1" [CR]
Detail
Get selected Input mode
Acceptable
Response
Unacceptable
8.5. Lamp Time Read Command
Command
"CR3" [CR]
Detail
Get total lamp running hours
Acceptable
Response
Unacceptable
8.6. Setting Read Command
Command
"CR4" [CR]
Detail
Get setting status for screen such as Ceiling / Rear
Acceptable
Response
Unacceptable
8.7. Temp Read Command
Command
"CR6" [CR]
Get the temperature inside a projector.
Detail
When some temperature sensors are installed in the projector, it is possible to
know the temperature all at once.
Acceptable
Response
%1, %2, %3
Unacceptable
Item
Status Read Command
"%1" [CR]
"1" = Computer-1 is selected
%1
"2" = Computer-2 is selected
"3" = Video is selected
"?" [CR]
"%1" [CR]
Show as 4 digits.
%1
Ex.: "0410" [CR] !410 hours
"?" [CR]
"%1" [CR]
"11" [CR] = Normal Screen Setting
"10" [CR] =
Flip vertical image
%1
"01" [CR] = Flip horizontal image (Rear ON)
"00" [CR] = Flip vertical & horizontal image (Ceiling ON)
"?" [CR]
"%1_%2_%3" [CR]
%1 = Temperature, sensor 1
%2 = Temperature, sensor 2
%3 = Temperature, sensor 3
Temperature data form shows as 00.0.
When the temperature sinks to -, the first character is "-" like
"-05.5" [CR].
When cannot return the temperature data due to hardware
problems, the first character is "E" like "E00.0" [CR].
When some temperature sensors are installed, the projector
sends command continuously.
"_31.5__35.2__33.4" [CR]
There is the first sensor's information, and after one space,
there is the second sensor's information.
"?" [CR]
(Rear＆Ceiling ON)
Page
18/18