Akyga AK-EC-01 Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Acessórios para automóveis Akyga AK-EC-01. Akyga AK-EC-01 5 páginas.
Imprimir página
AK-EC-05 - user manual
In case of any doubts regarding operation, safety or connection of the product, please contact
ź
the manufacturer or a qualified specialist for this purpose.
All maintenance, adjustment and repair work on the product may only be carried out by
ź
a qualified person in a specialist facility.
Removing the most common problems
Problem
The charger does not
work (red diode do not
light - POWER)
Car does not charge
How to use
1. Check that the charger or cable is not damaged.
2. Make sure the charger has the right type of plug for your car.
3. Turn off the car motor.
4. Check that the power socket is not damaged.
5. Connect the charger to the electrical outlet (Schuko).
6. Pull the protective cap off the plug.
7. Connect the other plug to the car's charging port.
8. The charging process will start automatically. The blue diode will start blinking.
9. When the charging process is finished, the charger will automatically turn off. The blue
diode will start shining.
10. After charging, disconnect the charger from the electrical outlet, then disconnect the plug
from the car's charging port and put the protective cap on.
Cause
No voltage
Problem with the plug
There is a suspicion of a
product defect
EV charger is not
connected to the car
Car does not prepare to
charging properly
Problem with the plug
There is a suspicion of a
product defect
Solution
Check if charger is properly
ź
connected to the car charging
port
Check the cigarette lighter
ź
fuses
Check if EV charger is properly
ź
connected to the cigarette
lighter socket
Stop using and contact the
ź
seller
Connect the charger to the car
ź
Check if car motor is turn on
ź
Make sure that the another
ź
charger is not connected to
car's second charging port
Check if the plug is connected
ź
correctly
Stop using and contact the
ź
seller
p. 3