Dormakaba 9700DE Manual de instruções de instalação - Página 4
Procurar online ou descarregar pdf Manual de instruções de instalação para Por fechaduras Dormakaba 9700DE. Dormakaba 9700DE 10 páginas. Delayed egress exit device
Imprimir página
dormakaba 9000 Delayed Egress Exit Device Installation
Instructions
1.3
Cylinder specifications
Standard 1 1/8" mortise cylinder, randomly
keyed supplied by factory. Spacer required
for longer cylinder such as when using an
IC core.
5/16" - 11/32"
(6310D)
21/32"
Cam
1.4
DIP switch setting
DIP switch settings should
be completed at time of initial
installation; check local building
code. Factory settings are as follows:
Standard Factory Setting
ON
OFF
4
1
23
S3
ON
OFF
1
23
4
S1
Exit Device
4
To Change Cylinder: Carefully remove filler from rail. Unscrew cylinder
nut, remove actuator and replace cylinder. Spacer required for cylinders
over 1 1/8". Insert cylinder as shown, re-install actuator & secure with
cylinder nut. Do not over tighten. Re-install filler in rail and reconnect the
small pigtail connectors. Use caution not to pinch or bind wires.
Note: If DIP switch settings are required to be changed, do it now prior to
re-installing filler in rail. (See Section below.)
1 1/8" Standard
DE filler
Underside of filler
95011817 (1135-88) IDE-20
Cylinder nut
4000-167-501
Actuator-DE
95055525
Cylinder
90J10SC118
(1) Audible fire alarm: (On) Active ; (Off) Not active
(2) For future use.
S1
(3) Power up state: (On) Locked ; (Off) Un-locked
(4) Door position switch: (On) In-Active ; (Off) Active
(1) Nuisance alarm time: (See chart below.)
(2) Nuisance alarm time: (See chart below.)
S3
(3) Authorized egress time: (See chart below.)
(4) Authorized egress time: (See chart below.)
Factory
3 Seconds
2 Seconds
ON
OFF
1
2
1
2
ON
OFF
3
4
3
Factory
5 Seconds
15 Seconds
Cylinder specifications
DIP switch settings
Underside of filler
1 Seconds
0 Seconds
1
2
1
2
4
3
4
10 Seconds
20 Seconds
3
4
01-2020