Boltek EFM-INV2 Manual de instruções de instalação - Página 2
Procurar online ou descarregar pdf Manual de instruções de instalação para Racks & Stands Boltek EFM-INV2. Boltek EFM-INV2 13 páginas. Inverting mounting kit
Imprimir páginaINSTALLATION OF THIS PRODUCT NEAR POWERLINES IS DANGEROUS.
FOR YOUR SAFETY, FOLLOW THE INSTALLATION DIRECTIONS.
DO NOT ATTEMPT INSTALLATION AT HEIGHTS UNLESS YOU ARE EXPERIENCED
IN THE SAFE USE OF LADDERS AND FALL ARRESTING EQUIPMENT. IF UNSURE
REFER INSTALLATION TO AN EXPERIENCED ANTENNA OR SATELLITE INSTALLER.
DO NOT WORK ON THE SYSTEM OR CONNECT OR DISCONNECT CABLES DURING
Installation and Grounding Warning
Warning
Do not locate the sensor near overhead power lines or other electric light or
power circuits, or where it can come into contact with such circuits. When installing the
sensor, take extreme care not to come into contact with such circuits, as they may cause
serious injury or death. For proper installation and grounding of the sensor, please refer to
national and local codes (e.g. U.S.:NFPA 70, National Electrical Code, Article 810, in
Canada: Canadian Electrical Code, Section 54).
1.0
2009
1.1
07/31/2011
1.2
10/10/2012
1.3
10/15/2020
(C) 2020 BOLTEK CORP
ELECTROCUTION WARNING:
FALL WARNING:
LIGHTNING ACTIVITY WARNING:
PERIODS OF LIGHTNING ACTIVITY.
Document Revision History
Original document
Added instructions to apply silicone grease to threads and washer
Updated contents of the Kit
Added fiber optic assembly upgrade installation
10/15/2020
EFM-INV_Instruction_1.3