Cansec Via Lock1 Manual de instalação - Página 4
Procurar online ou descarregar pdf Manual de instalação para Interruptor Cansec Via Lock1. Cansec Via Lock1 10 páginas.
Imprimir páginaConfigure Via Hub
D32 (BLUE)
Figure 2: Configure Via Hub Unit
DIP SWITCHES
DIP SWITCH "A" - ADDR
Do not change the default settings:
Switch A1 sets to DOWN (ON), switches A2-A8 set to UP (OFF).
ON
DIP SWITCH "B" - NET ID
Switches B1-B6 are used to set a Network ID which can be from 1 to 63 and must match the Net-
work ID of the Via Lock Control Unit (See figure 3 for typical Net ID configurations). Do not
duplicate Via Hub Network IDs unless they are well out of the range of each other (500 feet should
be safe). Switches B7 & B8 set to OFF (UP) for future use.
Set the Network ID according to the table below:
D35
C
(WHITE)
ON
D23 (RED)
D20 (GRN)
A
D E
B
D26
D27
D31
D30
Configuration Manual
ON
ON
ON
Via Hub
Page
4
of
10
July 2017 • Rev. 1.1