Dormakaba TP/TA EASY Safe Instruções de montagem - Página 10

Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior Dormakaba TP/TA EASY Safe. Dormakaba TP/TA EASY Safe 20 páginas.

Imprimir página

dormakaba mounting instructions

4.5

Mounting the panel

Note

If a PT 21, PT 24 or PT 25 is mounted on the

ceiling, an insert with bushing or a two-part

insert is pre-mounted in the top door rail.

Fig. 17

Panel clearance without cover profile

4.5.1

Mounting the panel with a top door

rail with bushing in insert and PT 21

on the ceiling

Slide the top door rail onto the glass.

Fig. 18

Sliding the top door rail on

2. Align the top door rail with a distance of 4.5 mm.

TP/TA EASY Safe

4.5

Fig. 19

Aligning the top door rail

3. Tighten all screws on the front and back so that

the top door rail clamps firmly to the glass.

5 mm

15 Nm

Fig. 20

Tightening the door rail screws

4. 2 people are needed to place the panel turned 90°

down on the floor bearing/the FDC.

5. Swing the panel in and position below the PT 21.

6. Turn the PT 21 pivot in the insert of the top door

rail.

4.5.2

Mounting the panel with a top door

rail with bushing in insert and PT 24

or PT 25 on the ceiling

Note

Mounting must only be carried out by 2

people.

Unscrew the top door rail. The insert clamps in the

half with the bar.

2. Place and mount the panel at the bottom on the

floor bearing/the FDC.

3. In doing so, hold the glass pane in a slightly

inclined position and secure.

4. Place the 1st half of the top door rail with the

insert on the pivot on the ceiling.

5. Swivel the glass pane on the half of the door rail

and hold in position.

6. Screw the 2nd half of the door rail on so that the

door rail can still be moved slightly.

Align the top door rail with a distance of 4.5 mm

(Fig. 19).

8. Tighten the screws so that the top door rail

clamps firmly on the glass (Fig. 20).

WN 060028 45532

Mounting

4.5

2020-11