CANTERBURY Z1408 Manual de início rápido - Página 4
Procurar online ou descarregar pdf Manual de início rápido para Produto de canalização CANTERBURY Z1408. CANTERBURY Z1408 13 páginas. Basin mixer with automatic pop-up waste
Imprimir páginaInstallation Instructions
Install the pop-up waste body top section 1, and waste
❶
body bottom section 4, to the basin as shown.
Ensure that the top seal 2, and bottom seal 3, are
installed correctly, to ensure proper functioning of the
pop-up waste system and prevent any water leakage.
❷
Thread the bottom brass lock nut 5, followed by
the bottom rubber washer 6, onto the Side
body 7, thread section.
Repeat for the opposite side.
Insert the Side body 7, through the tap hole cut
outs in the counter top.
Feed the top rubber washer 6, over the thread
section followed by the top brass lock nut 5.
Note: Make sure that the locking nuts are
❸
fully tightened, otherwise the side body may
turn while turning the On Off lever.
Further information Phone (03) 9761 4603
4
Model : Z1408
Continue.......