Asus Z87-K Manual - Página 16

Procurar online ou descarregar pdf Manual para Placa-mãe Asus Z87-K. Asus Z87-K 18 páginas.
Também para Asus Z87-K: Manual de início rápido (12 páginas)

Imprimir página

1. Motherboard Overview

•

1.4.3

Installing a DIMM

Unplug the power supply before adding or removing DIMMs or other system components.

Failure to do so can cause severe damage to both the motherboard and the components.

Press the retaining clips

outward to unlock a

DIMM socket.

Align a DIMM on the

socket such that the

notch on the DIMM

matches the DIMM slot

key on the socket.

a socket in the wrong direction to avoid damaging the DIMM.

Firmly insert the DIMM into the

socket until the retaining clips snap

back in place and the DIMM is

properly seated.

1.4.4

Removing a DIMM

To remove a DIMM:

Simultaneously press the retaining clips outward to unlock the DIMM.

1-8

The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value. To operate at the vendor-marked

or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory

frequency adjustment.

memory load (4 DIMMs) or overclocking condition.

Visit the ASUS website at: www.asus.com for the latest QVL.

Unlocked retaining clip

Locked Retaining Clip

Chapter 1: Product introduction

DIMM notch

DIMM slot key