Canvas 064-3177-0 Manual de instruções de montagem - Página 15
Procurar online ou descarregar pdf Manual de instruções de montagem para Lareira de interior Canvas 064-3177-0. Canvas 064-3177-0 17 páginas.
Imprimir página
PROBLEM
POSSIBLE CAUSE
No power.
The unit does not
Logs do not
have power.
glow.
E1 displayed
The overheat
on control
sensor has been
panel with
engaged.
beep sound.
The ambient
E2 displayed
temperature
on control
sensor is broken
panel.
or not working
correctly.
E3 displayed
Child lock
on control
function is active.
panel.
Fan motor
continues
Normal operation.
to blow
after unit is
powered off.
Power cord
gets warm to
Normal operation.
the touch.
SOLUTION
Check that unit is plugged into a
standard 120 V outlet. Then make sure
power is set at "ON" position.
Unplug unit, wait 5-10 minutes, then
the sensor will reset itself. Plug the unit
back in and turn on the heater. If the
problem persists, call customer service.
Unplug unit, wait 5-10 minutes, then
the sensor will reset itself. Plug the unit
back in and turn on the heater. If the
problem persists, call customer service.
To inactivate the child lock function,
holding the POWER button for 10
seconds.
This is a standard feature; the blower
runs for an additional 20 seconds to
ensure heat will not be trapped inside
the unit.
This is normal for a heater appliance
as it requires more current to operate.
Check the connections of the
appliance cord and the outlet. Make
sure the plug fits tightly into the outlet.
During use, check the plug and outlet
frequently to determine if it is HOT; if
so, discontinue use of the appliance
and consult with a qualified electrician
to check or change the overheating
outlet(s).
15
15