Battery Doctor 20085 Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Carregador de bateria Battery Doctor 20085. Battery Doctor 20085 6 páginas. Automatic switching mode with micro-controlled input: 100-140 vac / output: 12volt dc
Imprimir página
CONTROL AND INDICATORS
1. Charging Rate Selection Button
Press to Select the Current Charge Rate.
2. Charging Current LED Display
LED indicates the selected charging current (2A or 4A or 8A) #20085 (Model: SW121080)
3. Battery Type Selection Button
Press to select the Battery Type. (Calcium, AGM&WET or GEL Lead Acid Batteries)
4. Battery Type LED Display
LED indicates the selected Battery Type.
5. Charging Status Display LED
Bulk LED – Blue: Indicates the charger is at a maximum charging rate.
Absorption LED – Green: Indicates that the Battery is approaching full charge.
Absorption LED – Blinking Green: Indicates automatic equalisation stage for Calcium Battery.
Full LED – Green: Indicates the Battery is fully charged.
6. Charging Fault LED Display
See trouble shooting for further details.
7. Refresh Stage LED Display
Yellow Blinking LED Indicates the Refresh Charge.
8. Refresh Button
Press and hold this Button for 3 seconds to start the Refresh Stage.
RECOMMENDED BATTERY CAPACITY
The following minimum AH capacities are to be used as a general guide only.
Some Batteries maybe able to handle a higher Charge Current;
Check with the Battery Manufacturer when charging Batteries with small capacity.
Charge Current
Battery
6-40AH
Capacity
2A
4A
12-80AH
18-120AH
8A
-
2-