Electra VKE.P3FR.T7S9.ELB04 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Sistema de intercomunicação Electra VKE.P3FR.T7S9.ELB04. Electra VKE.P3FR.T7S9.ELB04 8 páginas. Touch line series video door phone kit 3.5”/7” 1 fam./2 fam./ 3 fam.

Imprimir página

INSTALLATION INSTRUCTIONS –

Dear Customer, thank you for choosing the ELECTRA products. We will assist you throughout the entire warranty period.

For technical support and assistance you can contact us at ELECTRA Building Communications GmbH WIEN,

+43 1 810 20 99, [email protected].

KIT INSTALLATION.

Follow the steps below, in the described order.

STEP 1. Read the diagrams in this brochure and the technical manuals of the KIT (VPM, VTx, SCU).

STEP 2. Make the electrical connections to the terminals (ATM, VTM, VTE) and then to the VPM outdoor panel (pg. 16, 17, 18).

STEP 3. Make the electrical connections of the LC, LA or LS lock to the terminals of the SCU central supply and command unit

and, if necessary, the connections to: the EXIT button; AUX additional installations; BAT; Vcam analog video camera

(pg. 15, 16, 17, 18).

STEP 4. AUTHORIZED PERSONNEL!!! READ THE SAFETY INSTRUCTIONS FROM THE MANUAL OF THE SCU CENTRAL

SUPPLY UNIT!!!

DISCONNECT the fuses and make the L,N,

power network. The

, S2 LEDs turn on, and S1 turns on only if the battery (12V/7Ah) is connected.

STEP 5.1. PROGRAMMING THE MAIN ENTRANCE PANEL: RFID CARDS/TAGs

button (point 5, pg. 15). The PROG Red LED turns on

RFID CARD to the

two beeps. Follow the same steps for programming all the RFID CARDS/TAGs, for all the residents of the building

Return to the SCU and short press the PROG button. The Red LED turns off. The main panel keeps address 1, which

is set from the factory and is ready to function.

STEP 5.2. PROGRAMMING THE ADDITIONAL PANEL: NEW ADDRESS and RFID CARDS/TAGs. If the access in the building is

made through two entrances, the VPM2 additional panel (point 10, pg. 19) from entrance 2 must be set up with address 2.

At SCU 2 long press the PROG button. The PROG Red LED turns on.

short touch the Fam.1 key, twice. The panel confirms the storage of address 2 with two short beeps. Continue programming

the CARDS/TAGs in the VPM2 panel.

Return to the SCU2 and short press the PROG button. The Red LED turns off. The VPM2 and VPM1 panels are ready to

function, with all the terminals in the building.

STEP 6.1 PROGRAMMING THE ADDRESS OF THE Fam.1 TERMINAL. The terminals keep Address 1, which is set by the

manufacturer.

STEP 6.2 PROGRAMMING THE ADDRESS OF THE Fam.2, Fam.3 or more TERMINALS. The terminals for Family 2 will have

address 2, the terminals for Family 3 will have address 3 and so on for 4, 5 etc.

Program the new addresses as follows:

At the terminals for Family 2, long touch the

key twice. Two short beeps are issued. The terminal stores address 2. Continue programming address 3 at Family 3 following

the same steps. Long touch the

with three short beeps. The terminals are ready to function.

RECOMMENDED CABLES

1) Max. 75 ml

4 x 0.5 mm (H03VV-F4G 0.5)

2) Max. 150 ml

4 x 0.75 mm (H05VV-F4G 0.75)

Out of electrical safety reasons, we recommend installing a grounding cable (minimum 1.00 mm – Green/Yellow) from the

panel (VPM) to the

central unit (SCU).

DETAILED PRODUCT CODES

VPM - smart video outdoor panel; Product codes: Video 1Fam.VPM.1S(F)R02.xxy04; 2Fam.VPM.2S(F)R02.xxy04;

3Fam.VPM.3S(F)R02.xxy04; 5Fam.VPM.5S(F)R02.xxy04 (S= Surface mounting, F= Flush mounting, R= RFID CARD/TAG access)

RFID access CARD/TAG (secured at reading and copying). They are stored and can be deleted from the VPM.

ATM - smart+ audio terminal; Product code: ATM.0S402.xxy04

VTM - smart+ 3.5" video terminal; Product code: VTM.3S402.xxy04,

VTM/VTE - smart+/extra 7" video terminal; Product codes: VTM.7S402.xxy04/ VTE.7S902.xxy04

VCB – Video connection box (1 video input/4 video outputs - 4 Fam.); Product code: VCB.4DN02.xxy04

(RFID) area for one second. For each programmed RFID CARD/TAG, the panel issues

Each touch of the CARD/TAG to the

At SCU 1 long press (2-3 sec.) the PROG button. The PROG Red LED turns on

key. The terminal confirms with one long beep. Short touch the

key and after the long beep, short touch the

(point 1, pg. 15) Maintain the same wire colors for the same connections.

VIDEO DOOR PHONE KIT

connections to the SCU

Go to the VPM panel from the main entrance and touch each

At the VPM2 panel, long touch the Fam.1 key, then

3) Max. 250 ml

UTP cat5e (AWG24) or UTP cat6e (AWG23)

CONNECT the fuses to the

At the SCU, long press (2-3 sec.) the PROG

area is confirmed by the VPM2 with two beeps.

key three times. Storage is confirmed