Electralog Electric Fireplace Manual do Proprietário - Página 9
Procurar online ou descarregar pdf Manual do Proprietário para Lareira de interior Electralog Electric Fireplace. Electralog Electric Fireplace 14 páginas.
counter clockwise until you hear a click. Leave in this position to
maintain the room temperature at this setting. For additional heat, turn
clockwise until you hear the click again and the heater will turn on.
Resetting the Temperature Cutoff Switch
Should the heater overheat, an automatic cut out will turn the heater
off and it will not come back on without being reset. It can be reset by
switching the Main Three Position ON/OFF Switch to OFF and waiting
5 minutes before switching the unit back on.
CAUTION: If you need to continuously reset the heater, unplug the
unit and call technical support at 1-888-346-7539.
!
NOTE: The heater may emit a slight, harmless odor when first
used. This odor is a normal condition caused by initial heating of
internal heater parts and will not occur again.
Remote Control (Figure 4)
The fireplace is supplied
with an integrated on/off
remote control.
!
NOTE: Ensure that
the fireplace 3
position switch is
set to the remote
control setting (up
position).
To operate, push the ON
button to turn fireplace
on, push the OFF button
to turn the fireplace off.
Battery Replacement (Figure 4)
To replace the battery:
• Slide battery cover open on the hand held transmitter.
www.sylvane.com 1-800-934-9194
Figure 4
ON
Button
OFF
Button
6
Battery
Battery
Cover