Doug Fleenor Design NODE1-P Manual do Proprietário - Página 2
Procurar online ou descarregar pdf Manual do Proprietário para Equipamento de gravação Doug Fleenor Design NODE1-P. Doug Fleenor Design NODE1-P 10 páginas. Single port node ethernet to dmx interface
Imprimir página
Overview
The N
1 is an Ethernet to DMX bridging device. It accepts Artistic License's ArtNet (version 3 or
ODE
prior), PLASA's Streaming ACN (ANSI E1.31), or Draft Streaming ACN protocols. There is one fully
isolated DMX512 port. The port can be configured as either an input or as an output.
The factory default configuration covers most applications.
configuration changes. Front panel LEDs show the status of the N
and DMX512 signal.
Both versions of the N
version fits in many single gang wall boxes. The portable version has holes for truss mounting using
a C-clamp or half-coupler. The portable version also uses a rugged Ethercon connector for its
Ethernet connection.
DMX PORT SPECIFICATIONS
Port circuit:
Input signal:
Output signal:
Connector:
Port protection:
ETHERNET SPECIFICATIONS
Ethernet circuit:
Connector:
Isolation:
OVERALL SPECIFICATIONS
Power input:
Color:
Size and weight:
1 are powered by Power over Ethernet (PoE – 802.3af). The architectural
ODE
EIA-485 transceiver with 120 ohm termination between Data+ and Data-
NOTE: This product uses slew-rate-limited output drivers. Slew-rate-limited
drivers minimize EMI and reduce reflections.
0.2 Volts minimum, 12 Volts maximum
1.5 Volts (minimum) into 120 Ohm Termination
Female Neutrik DL-series gold plated 5 pin XLR
(standard female connector, male on request)
+60V continuous, +15KV transient
100BASE-TX Fast Ethernet, MDIX, and Auto Negotiation
PoE RJ-45 for architectural, Neutrik Ethercon for portable
1500 Volts
802.3af PoE (Power over Ethernet), 3W
Black
Architectural: 4.5"H × 1.75"D × 2.75"W, 1 pound
Portable: 2"H × 5.375"D × 4.25"W, 1 pound
A web interface is used for all
2 of 10
1 power, network connection,
ODE