Doug Fleenor Design E2E Manual de configuração - Página 3

Procurar online ou descarregar pdf Manual de configuração para Conversor de multimédia Doug Fleenor Design E2E. Doug Fleenor Design E2E 8 páginas. Ethernet to ethernet protocol converter

Imprimir página

Figure 1: Node Discovery after finding both input and output

Double clicking on an entry in the Node Discovery program will open a default browser to the

address listed in the IP Address column. The status page shows by default, and all configuration

information for the E2E (IN or OUT) may be observed.

For cases where DHCP is unavailable, each interface is physically marked with a default IP

address. A PC with an IPv4 enabled Ethernet adapter set to a 10.?.?.? / 255.0.0.0 address and

subnet mask is suitable for direct communications with the default E2E static IP address.

Web Server

There are status and configuration pages contained on the two embedded web servers hosted

by the E2E. In and out configure similarly, with the exception that the Ethernet in interface

always has its virtual ports as output, and the Ethernet out interface always has its virtual ports

as input.

Status Page

The status tab shows the user all current configuration settings on the E2E interface.

The Status page will indicate Device name and Description, DHCP and other IP settings, the

universe number of each virtual port, and additional status.

Page 3 of 8