Dahua DH-HAC-EW2501 Manual do utilizador - Página 13
Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança Dahua DH-HAC-EW2501. Dahua DH-HAC-EW2501 18 páginas. Hdcvi fisheye camera
Imprimir página3.2
Installing Model B
No.
Item
①
Mounting surface
⑤
Self-tapping screw
Step 1
Drill screw holes (and the cable outlet hole if it needs to go through the mounting
surface) on the mounting surface① as indicated on the positioning map②, and then
insert the expansion bolts③ in the screw holes.
Step 2
Loosen the locking screws⑦ on the dome⑥, and then take off the dome⑥.
Step 3
Adjust the location of the pedestal④ according to cable outlet requirement (top out or
side out), and then pull the cable out through the mounting surface① or the side cable
tray.
Step 4
Put in and fasten the self-tapping screws⑤ to attach the device to the mounting
surface①.
Step 5
Connect the camera to power source and the XVR device, and then the live view
screen is displayed.
Step 6
Put the dome⑥ back on and fasten the locking screws⑦.
Figure 3-5
Model B installation
Table 3-2 Installation item list
No.
Item
②
Positioning map
⑥
Dome
No.
Item
③
Expansion bolt
⑦
Locking screw
No.
Item
④
Pedestal
—
—
Installation 6