Baumer GNAMG Series Manual - Página 7
Procurar online ou descarregar pdf Manual para Acessórios Baumer GNAMG Series. Baumer GNAMG Series 41 páginas. Inclination sensor with canopen interface
3.3. CANopen communication
3.3.1. Communication profile
Communication between network users and master (PC / control) is effected by object directories and objects.
Adressing the objects is by help of a 16bit index. The individual communication objects are standardized by
CANopen communication profile DS 301. They are subdivided into several groups:
• Process DataOobjects PDO for process data transmission in realtime
• Service Data Objects SDO for write and read access to the object directory
• objects for synchronisation and error warnings of CAN users:
SYNC-object (synchronisation object) for synchronisation of network users
EMCY-object (emergency object) for error warnings of a single device or its periphery
• Network Management NMT (network management) for initialization and network control
• Layer Setting Services LSS for configuration by serial number, revision number etc within the existing
network
3.3.2. CANopen message structure
First part of the message is the COB-ID (identifier).
Structure of the 11-Bit COB-ID :
Function Code
4 Bit Function code
The function code is defining the kind of message and priority. The lower the COB-ID, the higher the priority of
the message.
Broadcast messages:
Function code
NMT
SYNC
Peer to Peer messages:
Function code
COB-ID
Emergency
1)
PDO1 (tx)
180h + Node-ID
1)
PDO2 (tx)
280h + Node-ID
1)
SDO (tx)
580h + Node-ID
1)
SDO (rx)
600h + Node-ID
Heartbeat
700h + Node-ID
1)
LSS (tx)
7E4h
1)
LSS (rx)
7E5h
The Node-ID is optionally set anywhere between 1 and 127 via the CANopen bus (if rotary switch = 0). Default
setting of the inclination sensor is Node ID 1.
Changing the Node-ID is effected by using service data object 2101h or by LSS.
A CAN telegram consists of the COB-ID and a data packet of max. 8 bytes:
COB-ID DLC
Byte 1
Xxx
x
xx
More detailed information on the telegram structure in later chapters.
Manual_GNAMG_CANopen_EN.doc
21.11.12
Node-ID
7 Bit Node-ID
COB-ID
0
80h
80h + Node-ID
1): (tx) and (rx) from the inclination sensor's point of
view
Byte 2
Byte 3
xx
xx
Byte 4
Byte 5
Byte 6
xx
xx
xx
7/41
Byte 7
Byte 8
xx
xx
Baumer IVO GmbH & Co. KG
Villingen-Schwenningen, Germany