Baumer O200 Manual de instruções - Página 13

Procurar online ou descarregar pdf Manual de instruções para Acessórios Baumer O200. Baumer O200 34 páginas. Sensors with io-link

Imprimir página
Baumer O200 Manual de instruções
4.3.2.3 Hysteresis Alignment Mode (Only O200.G)
In case of axial detection tasks like stop trigger or level detection, an accurate switching distance is required.
To adapt the switching behavior and the hysteresis to the movement direction of the object, the alignment of
the hysteresis can be changed.
Only available for O200.G sensors.
Parameter name
Hysteresis.SSC1
Alignment
Left Aligned
4.3.2.3.1
Left Aligned defines the hysteresis to be aligned towards the sensor / against the sensing direction.
When to apply?
For an accurate switching distance in case the object is moving away from the sensor
-
Figure 12 Left Aligned, Single Point Mode
Right Aligned
4.3.2.3.2
Right Aligned defines the hysteresis to be aligned away from the sensor / in sensing direction.
When to apply?
For an accurate switching distance in case the object is moving towards the sensor.
-
Example: Stop trigger application, usual detection tasks.
o
Figure 14 Right Aligned, Single Point Mode
en_BA_O200_IO-Link_V1.docx
15.08.2018/
Short Description
Selection of the alignment modes
Available for SSC1.
Default: Right aligned
Rights
rw
Figure 13 Left Aligned, Window Mode
Figure 15 Right Aligned, Window Mode
13/34
Unit / Allowed values
-
Left Aligned
-
Center Aligned
-
Right Aligned
Baumer Electric AG
Frauenfeld, Switzerland