Dahua HAC-HD3103P Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança Dahua HAC-HD3103P. Dahua HAC-HD3103P 17 páginas. 1 megapixel hdcvi icr sync-focus dome camera

Imprimir página

3 Installation

Important

Before the installation, please make sure the installation surface can sustain at

least 3X weight of the bracket and the camera.

The dome camera usually uses the ceiling installation. It can be installed on the ceiling or the

wall.

For side exit cable installation, please make sure the side exit cable direction is the same

as shown in the installation position map.

Before you secure the screws on the pedestal, please put the cable through the cable exit

of the pedestal.

Before you complete the installation and debug, do not remove the electrostatic film. After

you remove the film, do not touch the enclosure in case there is any scratch.

All figures listed below are bases on the HAC-HDW3103 series product.

Step 1

Take the installation position map from the accessories bag and then put it on the surface of

the ceiling or the wall according to the cable exit position. Dig three holes according to the

installation position map and then take three expansion bolts from the accessories bag and put

them to the holes you just dug.

Step 2

Turn counter clockwise to remove the enclosure.

Step 3

Adjust the pedestal position according to the cable exit mode (ceiling/side). Pull the cable

through the cable side exit at the installation surface and the pedestal (Please skip this step if

you want to use ceiling exit mode). Line up the screw holes at the bottom of the pedestal to the

expansion bolts in the installation surface. Put three self-tapping screws to expansion bolts and

then secure firmly. Now the pedestal is on the installation surface. See Figure 3-1.