Asus AAM60BI Manual de instruções de configuração rápida - Página 16
Procurar online ou descarregar pdf Manual de instruções de configuração rápida para Router de rede Asus AAM60BI. Asus AAM60BI 30 páginas. Asus aam60ev; aam60bi; aam60vi adsl routers
Imprimir página11. Finally enter a valid web site name on the 'Address' line e.g. www.solwise.co.uk! It should work!!
5.2 Fault diagnosis script when you can't get on to the internet (a more detailed
process)?
1. Is your modem/router actually connected to the ADSL line?
Check the STATUS light. Is it flashing or on full. If flashing then this means you haven't got a connection to the DSLAM at
the local exchange.
Things to check:
I. Cable okay
plugged in right?
not going via an alternative route e.g. a patch panel?
faulty?
II. Check the Modulation
it should be G.dmt BUT might need to be ANSI.
To change Asus to use ANSI then you need to drop into CLI mode (via HyperTerminal or Telnet option 9).
Then enter
bsp mode ANSI
config save
@close
Reset router....
We had one Asus customer who had to do switch debug mode on so..
bsp mode ANSI
bsp debug on
config save
@close
Reset router....
III. Have you really got ADSL on the line?
IV. Lastly faulty router (but very unlikely – more likely line not set-up right by ISP/BT).
2. Have you got a connection to your ISP?
How can you tell?
On the Asus router go into the web configuration and select Statistics/PPP. Then click on Status.
Check the IPCP settings:
- 16 -