Electric Druid Flangelicious Manual de construção - Página 7
Procurar online ou descarregar pdf Manual de construção para Pedal de música Electric Druid Flangelicious. Electric Druid Flangelicious 10 páginas. Flanger project
Imprimir página
Flangelicious Construction Guide
www.electricdruid.net
If you have an oscilloscope (or a friend who does!) you can put the 'scope probe on the test point
(marked "TP1" in the centre of the board) and adjust the trim for minimum clock bleedthrough. If
you don't have an oscilloscope, you can do the same with a multimeter on a AC voltage range -
you should be aiming for 100mV or less.
You can also adjust the trim by ear. With no input signal (turn the guitar down to zero) turn the
amp up loud until you can hear the background noise, and then adjust the trim to minimize the
noise.
You're done! Congratulations and enjoy your new pedal!
PS: We appreciate any feedback, suggestions, or thoughts you have about this pedal or any other Druid
project. Please get in touch through the website. Thanks!
Page 7