Electric Eel Z5-AF Manual do operador - Página 5
Procurar online ou descarregar pdf Manual do operador para Equipamento de limpeza Electric Eel Z5-AF. Electric Eel Z5-AF 9 páginas. Drain cleaning machine
Também para Electric Eel Z5-AF: Manual de Segurança e Operação do Cliente (2 páginas)
Imprimir página
8. When using extension cord
outdoors, only use those
intended for outdoor use.
(Indicated on cord by suffix
"W-A" after cord type.)
THE GROUND FAULT CIRCUIT
INTERRUPTER
(GFCI)
This
machine
is
Ground Fault Circuit Interrupter (GFCI)
which is designed to prevent a serious
electrical shock. This device should be
tested on the job site before putting
the machine into operation as follows:
1. To
ensure
electric shock, test the device
before each use.
button is pushed in, the indicator
light should go off.
the device by pushing the reset
button in.
goes on, the device is ready for
use. DO NOT use the device if
the indicator light does not go on
when reset or if the indicator
light remains on, when the test
button is pushed in.
2. This
device
against electric shock resulting
from defects or faults in any
wiring supplying power to this
device, or from contact with both
circuit conductors.
DANGER
TO
PREVENT
INJURY AND TO AVOID DANGER
FROM
ROTATING
EQUIPMENT:
equipped
with
protection
against
When test
Reactivate
If the indicator light
does
not
guard
SERIOUS
BODILY
CABLES
AND
1. USE CAUTION AT ALL TIMES.
Cable can twist or kink and
cause serious injury. Fingers or
other body parts can be caught
in rotating parts.
2. NEVER handle the rotating
cable.
3. NEVER handle any cable
a
under tension. Relieve all
tension build up before
attempting to handle cable.
4. NEVER operate machine without
cable guide in place.
5. Use feeder to advance or retract
cable with motor switch in
FORWARD position for ALL
cleaning operations.
6. DO NOT continue to operate
machine when cleaning tool
becomes stuck in obstruction.
Excess torque on a cable
could cause it to fracture.
(Refer to operating instructions
to free cleaning tool.)
7. NEVER force a tool and cable
into a pipeline blockage. This
may overload the cable or tool
and cause it to fracture.
8. ALWAYS wear HEAVY leather
gloves and safety glasses when
operating machine.
9. Use correct tool for the job or
application. Check the tool
listing for the correct tool and
line size.
5