Baumer AMG 11 Instruções de montagem e de utilização - Página 36
Procurar online ou descarregar pdf Instruções de montagem e de utilização para Conversor de multimédia Baumer AMG 11. Baumer AMG 11 44 páginas. Absolute encoder
Também para Baumer AMG 11: Instruções de montagem e de utilização (36 páginas)
Imprimir página
7
Elektrischer Anschluss / Electrical connection
7.5
Hinweis für Ex-Schutz
Vor
der
Klemmenkastendeckel(s) prüfen, ob
die
Klemmenkastendeckeldichtung
unbeschädigt ist.
7.6
Sensorkabel HEK 8 (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 zu verwenden oder
ersatzweise ein geschirmtes, paarig ver-
seiltes Kabel. Das Kabel sollte in einem
Stück und getrennt von Stromkabeln ver-
legt werden.
Kabelabschluss:
1 ... 3 kΩ
Weiß/White = K1 (A+)
Braun/Brown = K1 (A-)
Grün/Green = K2 (B+)
Gelb/Yellow = K2 (B-)
Grau/Grey = Clock (Clock+)
Rosa/Pink = Clock (Clock-)
Schwarz/Black = Data (Data+)
Violett/Violet = Data (Data-)
= Masseanschluss (für die Signale)
Ground (for the signals)
33
Montage
des/der
Rot/Red = +UB
Blau/Blue =
Baumer_AMG11-B3_DE_EN_202010_MI_11127402 (20A1)
7.5
Advice for Ex approval
Check that the seal of the terminal
box(es) is not damaged before moun-
ting the terminal box(es).
7.5
Sensor cable HEK 8 (accessory)
Baumer Hübner sensor cable HEK 8 is
recommended. As a substitute a shielded
twisted pair cable should be used. Con-
tinuous wiring without any splices or cou-
plings should be used. Separate signal
cables from power cables.
Cable terminating resistance:
1 ... 3 kΩ
Aderendhülsen benutzen
Use core-end ferrules
Kabelschirm
Cable shield
MB086b - 11127402