Electric Eel eCAM ACE 2 SL Manual do operador - Página 11
Procurar online ou descarregar pdf Manual do operador para Instrumentos analíticos Electric Eel eCAM ACE 2 SL. Electric Eel eCAM ACE 2 SL 20 páginas. Video inspection system
Imprimir páginaUSER INSTRUCTIONS
Turning Your Monitor On
Press the POWER button to turn on the controller. At this point you
should see the Electric Eel on the screen while the system boots up.
Boot up takes ~12 seconds.
Note: It is good practice to remove batteries from electronic equipment
after use. Failure to do so may result in the batteries being drained over
extended periods.
Reel Selection
Your controller comes with two rod thickness / reel options. You
must select the correct reel size to ensure correct footage coun-
ter calibration. To select the correct reel press the MENU button,
then press enter again on the REEL SELECTION icon. You can
then confirm which reel you are using. The controller will remem-
ber the last reel you selected on restart.
Selecting a Manu Language
In the main menu you can select the language you prefer to read
menu information. Your choices are English, French or Spanish.
To select the preferred language, press the MENU button, then
press enter again on the CONTROLLER OPTIONS icon. Press the
enter key to highlight the language selection. Choose your language
and press enter to confirm
Turning the Sonde On / Off
On the main screen push the SONDE button to turn the sonde on or
off. Sondes are locatable up to ~15ft depth. dependent upon the
type of pipe (concrete/steel/cast iron) and the presence of thick con-
crete, sand or other utilities.
Footage Counter Reset
Pushing the COUNTER RESET button will reset the footage coun-
ter to zero.
11