Douglas Dynamics SnowEx Power Plow 8611 Manual de instruções de instalação - Página 6

Procurar online ou descarregar pdf Manual de instruções de instalação para Acessórios para automóveis Douglas Dynamics SnowEx Power Plow 8611. Douglas Dynamics SnowEx Power Plow 8611 17 páginas. Snowplow

Imprimir página

1. Hydraulic Unit

A‑FRAME TO HEADGEAR

1. Position the A‑frame between the headgear strut

and inner ear, aligning the appropriate hole in the

A‑frame that is determined by distance "d."

2. On each side, insert 1" x 4‑3/4" clevis pins (from

the shipping bracket) from the outside of the

headgear through the correct A‑frame holes.

Secure the clevis pins with 1" flat washers and

1/4" x 1‑1/2" cotter pins found in the parts bag.

1" x 4-3/4"

Clevis Pin

Lit. No. 52238, Rev. 05

INSTALLATION INSTRUCTIONS

3. Fold the headgear forward and pin the lift cylinder

to the A‑frame using a 2‑1/8" x 1/2" clevis pin and

1‑1/2" x 5/32" cotter pin from the parts bag.

4. Verify that the stand actuator pin is on top of the

stand.

Stand Actuator Pin

1" Flat Washer

Stand

1/4" x 1-1/2"

Cotter Pin

July 15, 2020