Douglas Dynamics WESTERN MVP PLUS 44495-1 Manual de instruções de instalação - Página 5

Procurar online ou descarregar pdf Manual de instruções de instalação para Acessórios para automóveis Douglas Dynamics WESTERN MVP PLUS 44495-1. Douglas Dynamics WESTERN MVP PLUS 44495-1 15 páginas. Snowplow

Imprimir página

LIFT FRAME TO T‑FRAME ASSEMBLY

1. Set aside the blade guides and parts bags. The

vehicle electrical harnesses and Owner's Manual

packet are in the bag with the headlamp box.

2. Remove the lag bolts and wood blocks securing

the headlamp channel to the lift frame and set the

headlamp channel aside.

3. Remove the packaging hardware securing the

lift frame to the T‑frame, except for the clevis pins

and the shipping brackets.

4. Remove the fasteners and blocking securing the

A‑frame to the pallet.

5. While supporting the lift frame, remove the clevis

pins and discard the shipping brackets.

Pivot Plate Hole Position

IMPORTANT! Before assembling the lift frame to

the T‑frame, the pivot plate hole position must

be determined using the following procedure.

(If the truck is not available, use hole position 2.

Adjustments can be made later.)

Before measuring the vehicle mount height, the

vehicle mount and receiver brackets must be installed,

ballast must be installed, if required, and the vehicle

must be parked on a level surface.

Hairpin Cotter

Driver-Side

Receiver Shown

Lit. No. 43174, Rev. 04

INSTALLATION INSTRUCTIONS

Vehicle Mount

Receiver

Bracket

1. Measure the distance "d" from the ground to the

top edge of the receiver bracket. Measure both

sides and determine average value for "d."

Top Edge of

Receiver

2. Use distance "d" from Step 1 and the following

table to determine the proper pivot plate hole

position.

Pivot Plate Hole Position

Distance "d"

13.0" – 14.5"

14.5" – 16.0"

16.0" – 19.0"

Hole Position

Position 1

Position 2

Position 3

July 15, 2020