Baumer ITD21H00 Instruções de instalação e de utilização - Página 9

Procurar online ou descarregar pdf Instruções de instalação e de utilização para Conversor de multimédia Baumer ITD21H00. Baumer ITD21H00 28 páginas. Incremental encoder

Imprimir página

General safety instructions

3.1

Risk of injury due to rotating shafts

Hair and clothes may become tangled in rotating shafts. Examine that involved

equipment can not be powered up during installation.

• Before all work switch off all operating voltages and ensure machinery is stationa-

ry.

• Secure machines of restarting.

3.2

Risk of destruction due to mechanical overload

• Never restrict the freedom of movement of the sine encoder. The installation ins-

tructions must be followed.

• Never use force. Assembly is simple when correct procedure is followed.

• Use suitable puller for disassembly.

• It is imperative to observe the specifications of the „Technical data".

3.3

Risk of destruction due to mechanical shock

Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the

sensing system.

• The encoder keeping away from mechanical vibrations, which are above the

specifications of the data sheet (don't throw or drop the encoder).

• It is essential that the specified clearances and/or angles are observed.

• Use suitable puller for disassembly.

3.4

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the optical sensing system and the bearings of the

encoder. Dismounting an encoder, secured to a shaft by adhesive may lead to the

destruction of the unit.

3.5

Risk of destruction due to soiling

Dirt penetrating inside the sine encoder can cause short circuits and damage the

optical sensing system.

• Absolute cleanliness must be maintained when carrying out any work on the elec-

trical connection.

• The encoder, in particular seals and connecting cables, may not come into con-

tact with corrosive liquids.

• When mounting/demounting, never allow oil, grease or other liquids to penetrate

the inside of the encoder.

3.6

Explosion risk

Do not use the sine encoder in areas with explosive and/or highly inflammable ma-

terials. They may explode and/or catch fire by possible spark formation.

Baumer_ITD21H00_II_DE-EN_1310.indd

General safety instructions

 9