Advanced ExGo Series Manual - Página 10

Procurar online ou descarregar pdf Manual para Painel de controlo Advanced ExGo Series. Advanced ExGo Series 20 páginas. Remote status indicators

Imprimir página

2.2.4

Abort Condition

RELEASE ABORTED!

PRESS RESET TO REARM

2.2.5

Fault Condition

[System status]

1 of

1 conditions:

DETECTION ZONE3

OPEN CIRCUIT

[Release status]

UNAFFECTED

NOTE: The fault condition is non-latching (except System Fault) and the indications will automatically be cleared

when the fault is remedied. Press the RESET key to clear a System Fault.

NOTE: If silenced, the buzzer will re-sound when a new fault occurs.

[System status]

1 of

1 conditions:

DETECTION ZONE3

OPEN CIRCUIT

For service call:

01234 567 890

2.2.6

Warning Condition

[System status]

1 of

1 conditions:

PRESSURE MONITOR

OPEN CIRCUIT

[Release status]

UNAFFECTED

If an abort button is activated, the imminent release countdown is

aborted.

The display prompts for the panel to be reset and the ABORTED

LED is illuminated.

Ensure that the abort button is de-activated and then press the

RESET button.

If the control panel detects a fault condition, the display will indicate

the number and nature of the faults. The internal buzzer will sound

with an intermittent tone and the FAULT LED indication will be

illuminated.

Press the  buttons to scroll through the list of faults.

Press the  button to silence the internal buzzer (if configured).

When the system buzzers are muted, the bottom two lines of the

display will show the telephone number to call for service (if

programmed) for four seconds.

If the panel detects an extinguishant warning condition, the display

will indicate the number and nature of the warnings. The internal

buzzer will sound with an intermittent tone and the FAULT LED

indication will be illuminated.

Press the  buttons to scroll through the list of faults.

Press the  button to silence the internal buzzer.