Baumer SXC80 Manual do utilizador - Página 37

Procurar online ou descarregar pdf Manual do utilizador para Câmara digital Baumer SXC80. Baumer SXC80 48 páginas. Sxc series cameralink cameras with truesense imaging sensors
Também para Baumer SXC80: Manual de início rápido (2 páginas)

Baumer SXC80 Manual do utilizador

User Sets

8.6.
Three user sets (1-3) are available for the Baumer cameras of the SXC series. The user 
sets can contain the following information:
Parameter
Binning Mode
CameraLink
Control
®
Defectpixellist
Digital I/O Settings
Exposure Time
Gain Factor
Look-Up-Table
These user sets are stored within the camera and and cannot be saved outside the de-
vice.
By employing a so-called "user set default selector", one of the three possible user sets 
can be selected as default, which means, the camera starts up with these adjusted pa-
rameters.
8.7.

Factory Settings

The factory settings are stored in an additional parametrization set which is used by de-
fault. This settings are not editable.
Parameter
Mirroring Control
Offset
Partial Scan
Pixelformat
Readout Mode
Testpattern
Trigger Settings
37