Baumer FLDM 170C1030/S42 Manual do utilizador - Página 27
Procurar online ou descarregar pdf Manual do utilizador para Balcão de caixa Baumer FLDM 170C1030/S42. Baumer FLDM 170C1030/S42 44 páginas. Laser copy counter
Imprimir página
A3:
aaa bbb
Thresh/Hyst.
A4:
aaaaaaa
SW-Revision
A5:
FLDM170
Type
A6:
abcd CAN
Remote Param
10.3.2 Menu B:
To protect the sensor against accidental or unauthorized manipulation of the parameter settings, the input
can be blocked in this menu. With a locked sensor, navigation is still possible.
There are two security levels. By default, the sensor is on the lower security level where unlocking is done by
setting parameter [B1] to off.
The sensor will be locked again if no key is pressed for 30 minutes
On a higher security level, the sensor can be protected against unauthorized tampering by requiring the user
to enter an ID code before the sensor will be unlocked. This higher security level can be activated by setting
parameter [F5], Lock-ID-code, to on.
The ID-code (which is asked for) is 55 and cannot be changed.
Submenu
Values
B1:
0 = off
1 = on
Input Lock
B2:
xxx
Unlock Code
User manual Scatec-10 / -15
Version 2017-10
Threshold and hysteresis
aaa
bbb
Version of the Scatec operation software
version consists of 6 numbers plus one
letter (example:
Scatec type
CAN Interface
a CAN mode
0 = value of CAN Object 2000 is 3
1 = value of CAN Object 2000 is not 3
b Compensation of synchronization point
(CAN-object2300, subindex 02, bit 0)
0 = off
1 = on
c Inserting missing counts
(CAN-object2300, subindex 02, bit 1)
0 = off
1 = on
d Automatic sensitivity adjustment
(CAN-object2300, subindex 02, bit 2)
0 = off
1 = on
Locks
Comments
sensor unlocked
sensor locked
ID-code is 55 and can not be changed.
(the ID-code-locking is activated in submenu
F5).
www.baumer.com
customized threshold
customized hysteresis
060421a)
27 / 44
[Locks]
Baumer Electric AG
Frauenfeld, Switzerland