Asus Pentium III IDE RAID Server AP110 Manual do utilizador - Página 49
Procurar online ou descarregar pdf Manual do utilizador para Servidor Asus Pentium III IDE RAID Server AP110. Asus Pentium III IDE RAID Server AP110 50 páginas. Asus ap110 pentium iii ide raid server user's manual
Imprimir página
Problem
The system continuously beeps
after it was turned on
The message "Non-system disk
or disk error" appears
RAID HDD is only detected as
1024MB
RAID HDD shows incorrect size
when you execute FDISK
PCI-IDE RAID controller does
not detect HDDs
Onboard IDE HDD is unstable
Network connection not
available
AP110 Server User's Manual
Action
1. Check the memory modules
and make sure you installed
the DIMMs the system
supports.
2. Make sure that the DIMMs are
properly installed on the
sockets.
Check if bootable HDD is active.
1. Boot from DOS/Win9x floppy
disk.
2. Run FDISK utility to delete all
partition
3. Reboot the system and run
FDISK /MBR.
If the RAID set is larger than 64GB,
try using SPFDISK utility to solve the
problem.
Press F6 and load the PCI-IDE RAID
driver when booting from Windows
NT/200 OS CD.
Install the VIA utility drivers from the
ASUS support CD.
1. Make sure the network cable is
connector the RJ-45 port on
the rear panel.
2. Make sure that you have
installed the network drivers
from the motherboard support
CD.
49