Baumer NE216 Manual de Instruções - Página 11

Procurar online ou descarregar pdf Manual de Instruções para Balcão de caixa Baumer NE216. Baumer NE216 22 páginas. Electronic preset counter

Read

Press

„SF" appears for one second on the display. The display then

jumps to the current scaling factor SF .

Modify

Enter scaling factor SF via

The setting range from 0.0001 to 999.99 is attained by shifting

the decimal point. Select decimal point via

Press

By pushing

5 Programming mode

Operation parameters are set on the programming level.

The programming level consists of 3 programming ﬁelds.

Access is protected by a 4-digit code.

Programming ﬁeld 1

Here it is possible to select and modify all operation parameters. The

operation parameters that are disabled for the operator are also dis-

played.

Programming ﬁeld 2

The individual operation parameters for operator access are disabled

or enabled here.

Programming ﬁeld 3

All functions and values as well as interface parameters conditioned

by the machinery are programmed here.

Switch on programming

Press

„Code" appears on the display.

No code number has yet been set at the factory, therefore it is

possible to skip the code query by pushing

programming line 50. After a code has been set, it will only be possi-

ble to switch to the programming level by entering the correct code.

www.baumer.com

key.

again, the current count is re-displayed.

and

key simultaneously.

and

and shift via

. The code is set on

NE216