Baumer NE230 Manual de Instruções - Página 35

Procurar online ou descarregar pdf Manual de Instruções para Balcão de caixa Baumer NE230. Baumer NE230 44 páginas. Electronic preset counter in din rail housing

Imprimir página

To enter code Enter the code with the keys

Incorrect code If an incorrect code is entered, „Error" appears in the display as long

Correct code unknown If the correct code is not known, please return the counter to the

Select programming lines Select the corresponding programming lines with the

Scroll back programming It is possible to jump back

Change operating Select the decade to be changed with the

parameters decade flashes. Enter the value by pressing the

Exit programming Programming can be ended at any time by pressing the keys

Reset to factory settings Switch on the device and simultaneously press the keys

5 Programming mode

Operating parameters are set in the programming mode, which is

subdivided into three programming segments. Access is protected

by a 4-digit code.

1st programming field

Here it is possible to select and modify all operation parameters. The

operation parameters that are disabled for the operator are also dis-

played.

2nd programming field

The individual operation parameters for operator access are disabled

or enabled here.

3rd programming field

All functions and values as well as interface parameters conditioned

by the machinery are programmed here.

Switch on programming

➜ Press the keys

● „Code" appears in the display.

No code is set in the factory settings, and therefore this code

request can be skipped by pressing the

programming line 40.

After a code has been set, it is only possible to switch to the pro-

gramming level by entering the correct code.

Press the

key to acknowledge the entry.

The system switches from the operator- into the programming level.

as the

key is pressed. After 15 s the system automatically swit-

ches back to the operator level.

supplier or reset it to the factory setting.

The corresponding line number is displayed. Press and hold the

key to scroll.

lines pressing and holding the

Press the

key to acknowledge.

and

(hold for 2 seconds.)

All values already programmed will be reset to the factory setting.

„ClrPro" appears in the display.

www.baumer.com

and

simultaneously.

and

within the programming lines by

key.

NE230

key. The code is set in

key.

key. The selected

key.

and