Dahua VTO2000A-C Manual de instalação rápida - Página 2
Procurar online ou descarregar pdf Manual de instalação rápida para Sistema de intercomunicação Dahua VTO2000A-C. Dahua VTO2000A-C 13 páginas. Video door entry system
Imprimir página
Home System Configuration
When configuring a home VDP system, all devices should first be connected together. Usually, this is done by connecting both the
camera unit (VTO) and monitor unit (VTH) to the VTNS1060A PoE switch.
The VTNS1060A is a 24v passive PoE unit, this is a different type of PoE than that seen on conventional IP devices. As such, both the
VTO2000A and VTH1550CH can only be used with 24v passive PoE or by connecting a 12/24vdc power supply to the power input
terminals on the units.
VTO2000A
VTO Connections
Tamper
Switch
Network
Connection
Tamper Switch
Network Connection
+12/24v
GND
12v Out
Unlock Button
Feedback
NO/NC/COM
2
VTNS1060A
24v PoE
Sounds an alarm in the event that the VTO unit is tampered with
Connect the supplied RJ45 adapter cable to this port
Used when not powering the VTO via PoE, connect the 12v or 24v DC positive supply to this
terminal
Ground connection for 12v or 24v DC negative supply and other inputs
DC 12v continuous output for auxillary device
Input to connect a switch such as a push button for releasing the door lock
Input for door contact to check if the door is closed before engaging lock
Relay output used when unlocking door
VTH1550CH
24v PoE
Inputs &
Outputs