COMBA PM-AS-ODP-033R11MJ53-SL Manual - Página 2
Procurar online ou descarregar pdf Manual para Antena COMBA PM-AS-ODP-033R11MJ53-SL. COMBA PM-AS-ODP-033R11MJ53-SL 2 páginas. Narrow beam directional antenna
Imprimir páginaINSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION
Step 1：Assemble the bracket
Step 2：Install the bracket
As shown, put the mounting bracket onto the
mounting pole and tighten the two M10.
mounting pole and tighten the two M10.
Mounting pole
0-
80mm(not supply)
80mm(not supply)
Φ5
Φ
Step 3：Install the Antenna
Remove the four screws from the antenna back
Remove the four screws from the antenna back
panel, and install the antenna onto the bracket
panel, and install the antenna onto the bracket
through the four screws.
© 2015 Comba Telecom. All rights reserved
Information contained in this document is subject to confirmation at time of ordering.
Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers' requirements.
DS-Control: 1-0-0 / 0118
bracket onto the
on and customers' requirements.
Step 4：Adjust the mechanical downtilt angle
Adjust the mechanical downtilt angle
The antenna can be turned horizontally and vertically,
The antenna can be turned horizontally and vertically,
both adjustment range is ±45°,then tighten all the
adjustment range is ±45°,then tighten all the
screws. (please use the inclinometer
screws. (please use the inclinometer
precise angle)
*Only qualified personnel are allowed to install the
Only qualified personnel are allowed to install the
antenna.
Nuts
M8
M10
for the
for the
Torque
Torque
20 Nm
44 Nm
Page 2