Amphony H500 Manual do utilizador e de instalação - Página 6
Procurar online ou descarregar pdf Manual do utilizador e de instalação para Auscultadores Amphony H500. Amphony H500 8 páginas. 5.8 ghz digital wireless headphones
Também para Amphony H500: Especificações (1 páginas)
Imprimir página
User and Installation Guide
Problems and Solutions Table
What Is
Happening
Transmit light of
transmitter does
not light when
DC power is
applied
Transmit light
goes out after 5
seconds and
does not light
again
No audio at
headphones
Audio is
distorted
Audio at
headphones
drops out
intermittently
For more information, including a detailed troubleshooting guide,
visit the Amphony web site at: www.amphony.com
Possible Why
Faulty AC adapter
or faul ty power outlet
No audio present at
audio input
Transmitter hung up
Batteries empty or
plus contact of
batteries deformed
Volum e contr ol at
minimum
Receiver hung up
Audio level too high
Strong interference
Batteries empty
Unstable power
supply
What to Do
Check the power outlet and the
AC adapter, if possi ble, check for
correct voltage of the adapter.
Check the audio connection to
the transmitter and ensure that
there is audio present.
Disconnect and then reconnect
DC power.
Check battery voltage, also
check that plus contact of both
batteries touch plus contact of
batt ery compartment,
repla ce batt eries if necessary
Slowly increase volume at the
headphones
Switch headphone power off and
on
Ensure that the audio level
provided by the audio device
conforms to the line output level.
If possible, lower the audi o level.
In som e cases, ther e may be
stron g interference pr eventi ng
proper transmission of the audio
signal, such as 5.8 GHz cor dless
telephones or wireless networks
etc. Try to eliminat e the
interference or r elocat e the
transmitter.
Check t he batt eries and repl ace
them if necessary.
Make sure that the power outlet
delivers a st able vol tage. Very
strong surges or voltage
fluctuations may cause audio
dropouts. Try using a surge
protector.
R R
Page 5