Amphony 1500 Manual do utilizador e de instalação - Página 6
Procurar online ou descarregar pdf Manual do utilizador e de instalação para Recetor Amphony 1500. Amphony 1500 8 páginas. 5.8 ghz digital wireless audio transmitter / receiver
Também para Amphony 1500: Especificações técnicas (2 páginas), Manual do utilizador e de instalação (17 páginas), Informações sobre o produto (4 páginas), Especificações (4 páginas), Manual do utilizador e de instalação (9 páginas)
Imprimir página
User and Installation Guide
Problems and Solutions Table
What Is
Happening
Transmit light of
transmitter does
not light when DC
power is applied
Transmit light
goes out after 5
seconds and does
not light again
No audio at
receiver
Audio at receiver
drops out
intermittently
Low operating
range
Audio is distorted
For more information, including a detailed troubleshooting guide,
visit the Amphony web site at: www.amphony.com
Possible Why
Faulty AC adapter or
faulty power outlet
No audio present at
audio input
Transmitter hung up
Receiver hung up
Strong interference
Unstable power
supply
Strong interference
Too many obstacles
between transmitter
and receiver
Strong interference
Transmitter audio
level too high
Receiver audio level
too high
What To Do
Check the power outlet and the
AC adapter, if possible, check for
the correct voltage of the
adapter.
Check the audio connection to
the transmitter and ensure that
there is audio present.
Disconnect and then reconnect
DC power.
Disconnect and then reconnect
DC power.
In some cases, there may be
strong interference preventing
proper transmission of the audi o
signal, such as microwave
ovens, directional data or vide o
transmission devices etc. Tr y to
either eliminate the interference,
relocate the transmitter, or use
RangeBooster transmitters to
improve reception.
Check that the power outlet
delivers a stable voltage. Try a
different power outlet or use a
surge protector.
See under "No audio at receiver".
Try to relocate the transmitter, or
use RangeBooster transmitters
to improve reception.
See under "No audio at receiver".
Try to lower the output level of
the audio source, use an
attenuator, or use another aud io
output.
Lower the receiver output level
by using an attenuator, or use
another audio input.
R R
Page 5