Combi Baby Keep Slim F62 Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Acessórios para bebés Combi Baby Keep Slim F62. Combi Baby Keep Slim F62 11 páginas.
Imprimir página
2
Periodic Inspection for Combi Baby Keep Slim F62/W62/W65 for Train
Periodic inspection is conducted periodically once a year.
● If any abnormalities are found during inspection, immediately stop using the product and contact your dealer
to request repair.
A. Checking Missing or Looseness of Various Screws
(when Combi Corner Bracket F31 (hereinafter, Corner Bracket) is not used)
Inspection Points
❶
Screws for concrete (2 locations)
❷
Anchor bolts (6 locations)
❸
Bottom cover fixing screws (2 locations)
❶
Checking Screws for Concrete
①
Use the back cushion and a flat-head screw driver to
remove the plastic caps (2 pcs), then use a Phillips
screwdriver No3 to remove the lower cover fixing
screws (2 locations ) and remove the lower cover.
*To disassemble the back cushion, refer to "Back
Cushion Replacement Procedure" on back cover.
Back cushion
Bottom cover fixing
screws (2 locations)
Plastic cap (2 pcs)
❷
Checking Anchor Bolt
Use Phillips screwdriver No3 or socket wrench, check the
anchor bolts (6 locations) are not missing or loosen.
Anchor bolt
(6 locations)
Inspection Method
Visual, Touch
(Phillips screwdriver No2)
Visual, Touch (Phillips screw
driver No3, Socket Wrench)
Visual
(Phillips screwdriver No3)
②
Use a Phillips screwdriver No2 to check screws
(2 locations) for concrete are not missing or loosen.
❸
Checking Lower Cover Fixing Screw.
After checking, assemble in the reverse procedure.
When assembling, make sure that lower cover fixing
screws (2 locations) and plastic caps (2 pcs) are not
missing or loosened.
After the assembly is completed, inspect it by referring to
Daily Inspection (page 4).
Use Phillips screwdriver No3, flat-head screw driver
8
Judgment Criteria
No missing or looseness
No missing or looseness
No missing or looseness
Screws for concrete
(2 locations)
Bottom cover fixing
screws (2 locations)
Plastic cap (2 pcs)
*Corner bracket is
sold separately.
Handling of Defects
Retightening
Retightening
Retightening