Combi Baby Keep Slim W62 Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Acessórios para bebés Combi Baby Keep Slim W62. Combi Baby Keep Slim W62 11 páginas.
Imprimir página
B. Checking Missing or Loosening of Various Screws (when corner bracket is used)
*The corner bracket is sold separately.
Inspection Points
Corner cover fixing screws
❹
(Upper and lower 2 locations each)
Corner bracket fixing screws (4 locations)
❺
Main body fixing screws (8 locations)
Bottom cover fixing screws (2 locations)
❹ Checking Corner Cover Fixing Screws and Corner Bracket Fixing Screws.
①
Use a back cushion and a
flat-head screw driver to
remove the plastic caps (2 pcs),
then use a Phillips screwdriver
No3 to remove the lower cover
fixing screws (2 locations ) and
remove the lower cover.
*To disassemble the back
cushion, refer to "Back
Cushion Replacement
Procedure" on back cover.
③
Use Phillips screwdriver
No2 for the corner cover
fixing screws (Upper and
lower 2 locations each)
and use Phillips screw
driver No3 or wrench to
check the corner bracket
fixing screws (4 locations)
❺ Checking Main Body Fixing Screws and Lower Cover Fixing Screws
After checking, assemble by the reverse procedure.
When assembling, use Phillips screwdriver No3 to make sure that main body fixing screws (8 locations) and lower
cover fixing screws (2 locations) are not missing or loosened.
After the assembly is completed, inspect it by referring to Daily Inspection (page 4).
C. Checking Appearance (Metal Parts)
Inspection Points
❻
Deformation or rust of main body frame
Missing, loss, deformation, rust of screws
❼
and metal fittings
D. Entering Inspection Date
After the periodic inspection, enter the inspection
date on the inspection sticker affixed to the lower
cover.
Inspection Method
Visual, Touch
(Phillips screw driver No2、
No3、 Wrench)
Visual, Touch
(Phillips screw driver No3)
Back cushion
Bottom cover
fixing screws
(2 locations)
Plastic cap (2 pcs)
Corner cover
Corner cover
fixing screws
(2 locations)
Back side of
the main body
Inspection Method
Visual
Visual
Inspection sticker
(Inspection S for 1-year silver)
Judgment Criteria
No missing or looseness
No missing or looseness
②
Use a Phillips screwdriver
No3 to remove the main
body from the corner
bracket.
Body fixing screws
(8 locations)
Corner bracket
Lower cover
fixing screws
(2 locations)
Corner cover
Judgment Criteria
No deformation or rust
No disconnection, loss,
deformation, or rust
9
Handling of Defects
Retightening
Retightening
Corner bracket
Corner bracket
Corner bracket
fixing screw
（4 locations)
Handling of Defects
Discontinuation
of use
Replacement