Combi Deluxe Activity Rocker 9725 Series Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Mobiliário para bebés e crianças Combi Deluxe Activity Rocker 9725 Series. Combi Deluxe Activity Rocker 9725 Series 8 páginas.

Imprimir página

Assembling the Main Frame

1. Place the Deluxe Activity Rocker on the floor.

Kneel down behind the seat. (A)

2. You must reset and balance the armrest reclining

position slot guides before proceeding.

To balance the slots guides:

Squeeze the reclining lever (B) located behind the

seat and push the seat forward to full upright

position. Then release the reclining lever to lock the

seat into position. Check to make sure the armrest

slot guides are in the same forward locked position.

(C)

3. To connect the leg (D) to the frame, grasp the top

of the leg with one hand and the frame (next to the

armrest) with the other hand. (E)

4. Insert the leg into the opening of the frame tube

until you hear a click and the lock pin can be seen

through the hole in the armrest

5. Be sure that the seat cushion's metal hooks

(located above and below the armrest) go over the

frame and snap under the seat cushion.

6. To make sure that the Deluxe Activity Rocker is ready

for use, place one hand behind the top of the seat

cushion and push up until the folding lever (F) slides

completely forward into place.

Attaching the Canopy

Canopy

Holder

Clamp

Reclining Tube

- 2 -

Armrest reclining

position slot guides.

Attaching the Canopy

To install the canopy place the notch in the clamp of the canopy holder into the

hole on the reclining tube. (Located above the armrest).

Note:

Clamp must be positioned behind the canopy holder in order to insert into the frame.

Recline

release

lever

located

behind the

seat.

Kneel behind

the seat to

reset and

balance the

armrest

reclinging

guides.

(F)