Follett HCD1400RBT Manual - Página 4

Procurar online ou descarregar pdf Manual para Máquina de gelo Follett HCD1400RBT. Follett HCD1400RBT 8 páginas. With remote air-cooled condensing unit
Também para Follett HCD1400RBT: Manual de instruções de instalação (17 páginas), Manual (8 páginas)

Imprimir página

Horizon

Chewblet ice machine

Horizon ice machine mounting accessories

Optional wall mount bracket

28.4"

(72 cm)

Horizon ice tube runs - specifier guidelines

minimum of

6" (15 cm)

beverage

turn/corner

dispenser

ice transport tube –

1 3/16" OD,

2 1/8" OD with insulation

Form# 3815

Optional machine stand

24.5"

(62 cm)

24.5"

A - 15.875" (40 cm),

(62 cm)

B - 19.375" (49 cm)

Long tube runs for RIDE remote ice delivery equipment

support

maximum

straps

2 ft (61 cm)

radius

transport tube slope

(toward ice machine)

1/4"

(2 cm per meter)

1000 series 1400 series or 1650 series

with remote air-cooled condensing unit

RIDE models - mounting installations/Horizon ice tube runs

6.8"

(17 cm)

C - 13" (33 cm),

D - 21" (53 cm)

wall-mounted

ice machine

Follett Corporation

801 Church Lane • Easton, PA 18040, USA

+1 (610) 252-7301 • Fax +1 (610) 250-0696

www.follettice.com

Important specifier notes:

1. For secure wall mounting, specify

optional wall mount bracket.

2. Wall and fasteners must support the

weight of the ice machine, bracket,

supply water and ice. Use of a backing

board may be required with hollow

wall construction.

3. Machine stand mounting adds 6.8"

(17 cm) to height of ice machine.

4. No dips in tube routing allowed.

5. Ice transport tube needs minimum 1/4"

per foot (2 cm per meter) pitch toward

ice machine and should be secured to

prevent dips and traps from forming.

Important specifier notes:

1. 75 ft (23 m) maximum ice

transport tube run (10' (3 m) for

Micro Chewblet ice).

2. Tubing routing bends must have

a 6" (15 cm) radius or larger.

3. If not supported from underneath,

secure insulated ice transport

tube at least every 2 ft (61 cm) to

prevent dips or traps.

4. Relative humidity levels above

80% in areas where the ice

machine or ice transport tube are

located may produce excessive

condensation that will cause

water damage.

5. Contact factory for

recommendations on running

tubing through a decorative soffit

or chase.

Follett Europe Polska Sp. z o.o.

Mokry Dwór 26C 83-021 Wiślina, Poland

+48 (58) 785-6140 • Fax +48 (58) 785-6159