Combi 9850 Manual de instruções - Página 4
Procurar online ou descarregar pdf Manual de instruções para Cadeira alta Combi 9850. Combi 9850 8 páginas. Combi high chair instruction manual 9800, 9810, 9850
Imprimir páginaUsing the Reclining Backrest
• Use the high chair with the backrest in the full recline
position to carry 2-3 month old babies without a strong
neck.
• The backrest can be adjusted to 5 positions.
• The footrest angle changes along with the recline.
1. To recline the backrest, pull and hold the reclining lock
lever
located on the back of the seat.
2. After the recline position is determined, always lock the
reclining lock lever by releasing it to its original position.
Using and Adjusting the 5-Point Harness
Attaching & Using the Wheels
To return the backrest to
the upright position, pull and
hold the reclining lock lever
and push the seat forward.
The seat will lock into place
again by releasing the reclining
lock lever.
Reclining Lock
Lever
1. Place the crotch belt between the
child's legs.
2. Insert both waist belt buckles into the
middle
plastic piece.
3. Attach each shoulder
strap hooks to the top of
the waist belt clips.
4. To adjust the harness or
waist belt, loosen the
slack on both sides of
each buckle.
CAUTION
Always adjust the harness when
changing the reclining angle.
Always keep the reclining lock
lever in the lock position.
Be careful that there are no
obstacles in front of it before
using since the footrest will move
during the recline.
Avoid serious injury
from falling or sliding
out. Always use har-
ness for security.
CAUTION
Always keep the wheels locked other
than when moving the high chair. Failure
to do so may cause the high chair to
move unexpectedly.
Wheels must be locked when using the
glide feature.
To lock wheels, lower the brake
lever. (Down position.)
To unlock wheels, lift the brake
lever. (Up position.)
Brake Lever
WARNING
CAUTION
Even when the har-
ness is fastened, be
careful not to let
the child slip out or
stand.
- 4 -