Dowco FISHINI Manual de instalação

Procurar online ou descarregar pdf Manual de instalação para Equipamento de navegação Dowco FISHINI. Dowco FISHINI 7 páginas. Bimini top

FISHINI BIMINI TOP INSTALLATION

TOOLS NEEDED

• Drill

• #2 phillips screwdriver or bit for drill

• Clear-drying silicone (recommended)

• 7/16 open-ended wrench

• Tape measure

• Tape you can write on

• Marker

• Countersink bit for drill (for fiberglass boats only)

• 9/32 drill bit (for bolting hardware to deck)

• 7/32 (or 15/64) drill bit (for screwing hardware to deck)

• 9/64 drill bit (for installation of eye straps)

• Paper towel (for cleaning off excess silicone)

• Blue Loctite® (recommended)

HARDWARE NEEDED - ALL INCLUDED IN HARDWARE KIT

• (4) #14 x 1½" flat-head sheet metal screws

• (4) 1/4" - 20 x 1½" flat-head machine screws

• (4) 1/4" - 20 x 2" flat-head screws

• (4) 1/4" - 20 nylon nuts

• (4) fender washers

• (2) rifle straps

• (6) Dowcolok deck buttons

• (2) eye straps

• (4) #10 x 1/2" long oval head sheet metal screws (windshield mount)

• (4) #10 x 1" long oval head sheet metal screws (console mount)

• (4) Black nylon washers

It is very important to read and understand these installation instructions, before you begin to install your Fishini top. If you have any

questions about this process, and need clarification please contact Dowco at 800-404-5252.

NOTE

SOME LUND, CRESTLINER, AND

TRACKER WILL HAVE A DIFFERENT

HARDWARE SET.

CAUTION

THE FISHINI TOP IS NOT DESIGNED TO BE TRAILERED IN THE DEPLOYED POSITION. THE LIMITED WARRANTY DOES NOT COVER DAMAGED

CAUSED BY TRAILERING.

WARNING

GOING FULL SPEED WITH THE

MOTOR MAY DAMAGE THE TOP

WHEN TOP IS IN THE RADAR

ARCH POSITION.

NOTE

WHEN DRILLING INTO FIBERGLASS,

REVERSE DRILL UNTIL YOU GET

THROUGH GEL COAT.

142780-00 | 03/18