1byone ROCK PIGEON 1-AD07US03 Manual de instruções - Página 14
Procurar online ou descarregar pdf Manual de instruções para Gira-discos 1byone ROCK PIGEON 1-AD07US03. 1byone ROCK PIGEON 1-AD07US03 17 páginas. Belt drive turntable system
Imprimir página
There is no power:
- The turntable is not connected to the power adapter.
- No power at the outlet.
The platter doesn't turn although the unit is switched on:
- The unit is not connected to the main power supply.
- No power at the outlet.
- The drive belt is not installed or has slipped off.
No signal through one or both channels:
- Phono input not selected on amplifier.
- Amplifier not switched on.
- Amplifier or speakers muted.
- No connection to the speakers.
- No connection between turntable and amplifier.
- Wire leads not connected to the cartridge.
Strong hum on Phono input:
- No ground connection from cartridge, arm, or arm cable to amplifier or groun
- Turntable is too close to speakers.
Distorted or inconsistent sound from one or both channels:
- Turntable is connected to wrong input of the amplifier.
- Needle or cantilever damaged.
- Drive belt overstretched or dirty.
- Platter bearing is without oil, is dirty, or is damaged.
- Dust on stylus.
- MM / MC switch on pre-amplifier set incorrectly.
Needle is not touching the record:
y
- The screw on the tonearm rest may have loosened during transport. Gently tu
rily
screw clockwise to move the needle stylus closer to the record.
e or
11