DOYMA Curaflex Nova Uno/M/Z Instruções de instalação - Página 2

Procurar online ou descarregar pdf Instruções de instalação para Equipamento industrial DOYMA Curaflex Nova Uno/M/Z. DOYMA Curaflex Nova Uno/M/Z 4 páginas. Gasket inserts

Imprimir página
INSTALLATION INSTRUCTIONS
Curaflex Nova
Gasket inserts
®
Installation conditions
• Breakouts, cracks and/or cavities in core bores in waterproof
concrete should be smoothed in advance.
• Pipe sleeves must be rigid enough to withstand the compressive
forces from the gasket insert and must have a smooth, circular
inner surface. If pipe sleeves are damaged they must be tested in
advance for usability.
• The media line (cable or pipe) to be sealed must be cleaned in
advance and must not have any axial depressions or elevations in
or around the sealing area.
• Compact the substrate and pipe substructure well before laying
the pipe/cable, so that no sinking is possible.
• In addition to the usual standard tool, you also need the following
tools and equipment in order to properly install the gasket insert:
Tools:
1 extension
1 hexagon socket
(for size, see installation steps)
Equipment:
Lubricant
Cleaning agent (solvent-free)
Calliper gauge
Cleaning cloth
• Sealing components for the media pipe/cable/cable protection
pipe must be installed in a core bore in waterproof concrete or a pre-
installed pipe sleeve (the position of the gasket insert must be taken
into account; see installation step 4).
Installation steps
1: Take measurements
Curaflex Nova
Uno/M/Z
®
Ø d
Determine the diameter of the core boring or pipe sleeve,
and the media line and check it against the information
on the carton.
www.doyma.com
Curaflex Nova
Uno/M/Z
®
Curaflex Nova
Uno/M/Z
®
B
A
B
Media lines to be sealed are shown in Table 1.
Scope of delivery
• Curaflex Nova
Gasket insert
®
• 2 onion ring inserts
• Installation instructions
Accessories (optional)
4 fixing brackets with screws
Product No.: 1 88 0 600 004 2 9
ITL nuts (9 units)
Article no. 1 88 0 600 009 0 0
Aquagard primer (Curaflex
1710), 1 litre for 4.0 m
®
Product No.: 1 99 0 710 000 0 0
Aquagard primer (Curaflex
1711), 1/3 litre for 1.5 m
®
Product No.: 1 99 0 711 000 0 0
Aquagard special paint (Curaflex
Product No.: 1 99 0 715 000 0 0
Aquagard special paint (Curaflex
Product No.: 1 99 0 716 000 0 0
Individual modular sealing ring inserts (optional)
ZS/G/40/EPDM 4-20
Product No.: 4 99 8 001 000 0 4
Media lines to be sealed (outer diameter)
A
B
1
2x 6-15 mm
1/4 + 1/2
2x 6-15 mm
3/8 + 5/8
2x 6-15 mm
1/4 + 5/8
Table 1
possible media lines - see on the carton
1
2
2
1715), 1 litre for 3.5 m
®
2
1716), 1/3 litre for 1.0 m
®
2
in [inch]
Page 2