Amplitec C10 Series Manual do utilizador - Página 12
Procurar online ou descarregar pdf Manual do utilizador para Repetidor Amplitec C10 Series. Amplitec C10 Series 17 páginas. Standard wide band repeater
Também para Amplitec C10 Series: Manual do utilizador (8 páginas)
Imprimir página
Please check whether the connection of RF cable is correct (donor antenna connected to
BTS port, service antenna connected to MS port), and whether every port is stable. After
affirmation, please go along the followings:
5.1
Power supply connection
After power supply connection, check ALARM and POWER and PA failure indicators first.
Status and definition of POWER indicators:
Status
green
off
Status and definition of ALARM indicators:
Status
green
red
orange
off
5.2
Performance setting
Curve chart of equipment working condition
Definition of ALARM
Meaning: working in linearity
attention: Input signals may be not enough
Meaning: overloading or self oscillation, strong input signals
Attention: cut the connection of equipment and service antenna,
then connect the MS port to load, if the red light changes to green
or orange, which means the isolation of donor antenna and service
antenna is not enough, then please adjust the isolation.
If the red light still turning on that means over accepting of donor
antenna or strong interference, then please adjust the place of
donor antenna..
Meaning: it is working in linearity
Repeater break down
Repeaters
Definition
Normal
DC power problem
User Manual of
C20-GSM
11