Follett Maestro Plus MCD425ABS Manual de instruções de instalação - Página 10
Procurar online ou descarregar pdf Manual de instruções de instalação para Máquina de gelo Follett Maestro Plus MCD425ABS. Follett Maestro Plus MCD425ABS 16 páginas. With ride technology
Imprimir página
cabinet door
supplied air
intake grille
WARNING
• Keep ventilation openings in the
appliance enclosure clear of
obstruction. Failure to do so could
result in damage to equipment.
12"
(30.5 cm)
1.5" (38 mm)
1.75"
(45 mm)
§ Intake and Exhaust Grille Placement: air-cooled
models only
– Position the intake grille cut out in the access
panel/door
Note: Ice machine must be aligned with cut out
and inside of access panel to provide a
tight seal and prevent recirculation of hot
exhaust air.
– Left edge of cutout should be 1.75" (4.5 cm) from
the left side of the ice machine
10
air intake gasket
door & gasket
must mate
directly
cutout for supplied air intake grille
12"W x 12"H (30 cm x 30 cm)
➎
18" min.
(46 cm)
Cabinet
Door cutout
12"
(30.5 cm)
➌
Maestro Plus
Completed installation with
gasket and door in place
22.75" (57.8 cm)
Front
A: additional 3" (7.6 cm) required if
receptacle located directly behind unit.
3D Counter View
22.25 " min.
(57 cm)
12"
(30 cm)
12"
(30 cm)
– Bottom edge of cutout should be 1" (2.5 cm)
from the bottom of the ice machine
– Position supplied exhaust grille at least 18"
(46 cm) away from intake grille
possible, install exhaust grille to the rear or side
of the base cabinet.
– If not using supplied grille, air circulation
requirements must be met: 160 sq. in (1032 sq
cm) intake/exhaust air.
Side View
A
29"
(74 cm)
minimum
drain tube
➋
24" min.
(61 cm)
➍
➎
. Where
.
Vision • RIDE Technology